|
Your NikDesign number was designed to be hooked onto the doorbell button. It works just like the little
bulb in the button itself.
This power should be rated less than 16 VAC to ensure the long life of your number. To hook up the
number, simply bring the two wires from the number to the two power screws located on your doorbell
button.
If you are using an AC adaptor, use the twist connectors supplied with the adaptor to make the connection.
Conceal wire under siding; for brick coat wire with paintable caulking and retouch with gray paint.
The number doesn't seem bright: Measure doorbell voltage, it's probably
lower than 12 VAC. You will need an AC adaptor.
|
